volume: 46, issue: 1
Tracking roadside wood inventories is necessary for wood procurement. However, this operation is increasingly problematic due to the costs associated with reaching remote sites, labour shortage, and the methods providing limited information on the characteristics of the logs required for transport planning. To overcome these problems, an automated procedure has been developed in Arcmap to characterize individual wood pile inventories at roadside by using GPS points of forwarders, harvester production files, and the road network shape files. An inventory of the logs in the harvest area followed by a wood pile inventory at the roadside were made to evaluate how the procedure could trace logs from machine operating trail to predicted wood pile locations. The study was done at six harvest blocks in the Saguenay-Lac-Saint-Jean region in the province of Quebec, Canada. The procedure was not able to differentiate individual wood piles and aggregated several piles into predicted unloading areas. Results indicated a similarity index of 72% to manually inventoried wood piles. The similarity index could be explained by the low percentage of inventoried unpredicted wood pile lengths (3%) and a high percentage of overpredicted wood pile lengths (27%). The positive allocation rate could not be assessed at the level of the individual piles. On the other hand, the procedure properly allocated 96% of the logs to unloading areas. With the level of precision obtained, the developed procedure could be beneficial for managing the transportation of wood at the level of the road segment since it provides all the dendrometric data of the logs available for transport without requiring human intervention in the forest.
volume: issue, issue:
Wildfires are among the most significant natural disturbances affecting boreal forests, yet their operational impacts on mechanized harvesting remain poorly quantified. This study evaluated the effects of wildfire burn category on harvesting productivity and volume recovery under operational conditions in Quebec, Canada. Over 800 stems were harvested across four burn categories: carbonized, red, affected and green (unburned). Harvesting productivity was assessed through a time-and-motion study combined with harvester on-board computer (OBC) data, while volume recovery was calculated as the ratio of harvested volume to standing merchantable volume per stem. Non-parametric statistical tests and regression analyses were used to compare harvesting productivity and volume recovery across burn categories. Results showed that harvesting productivity did not differ significantly among burn categories within the examined stem size range (≤0.20 m³/stem), indicating that wildfire severity alone did not reduce operational productivity. In contrast, volume recovery rates were significantly lower in burned categories compared to unburned stands, with reductions increasing with burn severity. These results suggest that post-fire economic losses are more strongly linked to reduced wood recovery than to decreased harvesting productivity. Overall, this study provides empirical evidence supporting the operational feasibility of harvesting in burned boreal stands, while emphasizing the need to account for burn-related wood losses in planning following wildfires. Future research using large-scale OBC datasets is recommended to further refine the evaluations of harvesting productivity and volume recovery across burn categories.
volume: 48, issue: 1
Wildfires are among the most significant natural disturbances affecting boreal forests, yet their operational impacts on mechanized harvesting remain poorly quantified. This study evaluated the effects of wildfire burn category on harvesting productivity and volume recovery under operational conditions in Quebec, Canada. Over 800 stems were harvested across four burn categories: carbonized, red, affected and green (unburned). Harvesting productivity was assessed through a time-and-motion study combined with harvester on-board computer (OBC) data, while volume recovery was calculated as the ratio of harvested volume to standing merchantable volume per stem. Non-parametric statistical tests and regression analyses were used to compare harvesting productivity and volume recovery across burn categories. Results showed that harvesting productivity did not differ significantly among burn categories within the examined stem size range (≤0.20 m³/stem), indicating that wildfire severity alone did not reduce operational productivity. In contrast, volume recovery rates were significantly lower in burned categories compared to unburned stands, with reductions increasing with burn severity. These results suggest that post-fire economic losses are more strongly linked to reduced wood recovery than to decreased harvesting productivity. Overall, this study provides empirical evidence supporting the operational feasibility of harvesting in burned boreal stands, while emphasizing the need to account for burn-related wood losses in planning following wildfires. Future research using large-scale OBC datasets is recommended to further refine the evaluations of harvesting productivity and volume recovery across burn categories.