Crojfe

Search

Bumber Zoran, MSc

Soil Characteristics in Oak Lowland Stand – A Case Study of a 6-Wheeled Forwarder's Impact on Forest Soil

volume: 45, issue:

The behavior of the vehicle-soil interaction and reduction of the possible soil damage to an acceptable level is one of the goals of forest engineering. This study aimed to analyze the impact of a 6-wheeled forwarder on water-physical soil characteristics on lowland soil – pseudogley. The research was conducted using a 17-ton Timberjack 1710B forwarder, which forwarded 694.1 m3 volume of oak (Quercus robur L.) assortments. Soil characteristics were measured after each of the eight passes of the loaded forwarder. Bulk density measured on the surface layer ranged from 1.01–1.23 (Me=1.10) g/cm3 (undisturbed soil); 1.14–1.70 g/cm3 (multiple passes of the loaded forwarder). The highest soil density increase was observed after the first pass of the loaded forwarder (16%). Soil solid phase ranged from 2.49 to 2.73 g/cm3 with no statistically significant difference between undisturbed soil and soil after multiple passes of the vehicle. The highest porosity decrease was observed after the first pass of the loaded forwarder (10%). The highest soil water retention capacity decrease was observed after the first pass of the loaded forwarder (3%). The highest soil air capacity decrease was observed after the first pass of the loaded forwarder (30%) compared to the undisturbed soil of the forest stand.

From XS to XL: A New Size Classification of Forwarders Based on Payload and Machine Characteristics

volume: issue, issue:

Forwarders are usually classified based on characteristics such as the number of wheels, net weight, payload, engine power, vehicle width, and the loader's lifting torque and boom reach. Existing forwarder classifications are either too basic or too detailed. Even though payload is the most significant influencing factor of timber extraction productivity by forwarders, classification of forwarders should be based not only on the forwarders payload, but also on their other characteristics. A database consisting of 115 market-available forwarders in 2025 was gathered and analyzed, leading to a new forwarder categorization where forwarders are divided into five classes and are presented with 16 different and comparable characteristics. The proposed classification distinguishes five forwarder classes: XS (<4 t), S (4–9 t), M (9–15 t), L (15–20 t), and XL (>20 t), each characterized by corresponding ranges of machine parameters. Eight-wheeled forwarders with hydrostatic-mechanical transmission predominate on the current market. The proposed five-class categorization provides an updated, comprehensive framework for comparing forwarders and supporting machine selection based on operational requirements.

From XS to XL: A New Size Classification of Forwarders Based on Payload and Machine Characteristics

volume: 48, issue: 1

Forwarders are usually classified based on characteristics such as the number of wheels, net weight, payload, engine power, vehicle width, and the loader's lifting torque and boom reach. Existing forwarder classifications are either too basic or too detailed. Even though payload is the most significant influencing factor of timber extraction productivity by forwarders, classification of forwarders should be based not only on the forwarders payload, but also on their other characteristics. A database consisting of 115 market-available forwarders in 2025 was gathered and analyzed, leading to a new forwarder categorization where forwarders are divided into five classes and are presented with 16 different and comparable characteristics. The proposed classification distinguishes five forwarder classes: XS (<4 t), S (4–9 t), M (9–15 t), L (15–20 t), and XL (>20 t), each characterized by corresponding ranges of machine parameters. Eight-wheeled forwarders with hydrostatic-mechanical transmission predominate on the current market. The proposed five-class categorization provides an updated, comprehensive framework for comparing forwarders and supporting machine selection based on operational requirements.