volume: 46, issue: 1
Traction assistance of forest machines via traction aid winches has gained widespread application in steep-terrain forest operations as it can mitigate soil disturbance by reducing wheel or track slip of the assisted machine. Since slip affects machine operations in flat terrain as well, especially on fine-grained and moist soils, the effectiveness of traction assistance under such conditions was evaluated. At a forest site, a forwarder with a total mass of 28.6 t was driven over two plots in 15 passes. The machine travelled unassisted over one plot, while on the second plot traction assistance was manually adjusted to keep slip close to 0%. Wheel slip and winch tractive force were recorded during each pass, and rut depth was measured after each pass. Soil density was measured pre-impact and at three times after different traffic increments. Although the mean wheel slip was low even during unassisted travel, traction assistance was found to cause a significant reduction. While both a decrease in rut depth and soil compaction were observed with traction assistance, only the latter was significant after three machine passes. A potential influence of inhomogeneous soil reinforcement due to roots suggests repeating the experiment on a more homogenous soil.
volume: issue, issue:
Forest workers often face repetitive and strenuous work tasks, leading to a high rate of musculoskeletal disorders and therefore incapacity for work. Most pronounced are pain as well as wear and tear in the lower back and the joints of knees and shoulders. Exoskeletons have already shown potential in reducing physical strain in various industries. Therefore, this pilot study aimed to investigate the usability and range of effects of a passive shoulder exoskeleton on forest workers during pruning operations in forestry to improve work conditions and reduce physical strain. Three healthy probands performed pruning tasks on Douglas fir trees in alternating sessions with and without the exoskeleton. Productivity, physical load, and muscle activity were assessed. Differences in working speed and productivity were observed among probands, but no correlations between exoskeleton use and productivity. Furthermore, no clear effect of exoskeleton use on heart rate or oxygen uptake was found. Electromyographic measurements indicated reduced muscle activity in three investigated shoulder muscles when wearing the exoskeleton. The anterior deltoid muscle of proband 3 shows the most significant response with a reduction of 39.9%, whereas the middle deltoid of probands 1 and 2 exhibits the greatest effect, with reductions of 14.5% and 14.0%, respectively. When comparing upward and downward arm movements specifically, the deltoid muscle activity (both anterior and middle) is reduced most effectively during downward movements. This reduction is most pronounced in proband 3, with a 56.5% decrease in the anterior deltoid, and in proband 1, with a 39.8% decrease in the middle deltoid. However, one proband exhibited noticeably increased loads in the upper trapezius muscle while wearing the exoskeleton, independent of the arm movement direction. This pilot study suggests that the passive shoulder exoskeleton has the potential to reduce muscle activity during pruning operations in forestry. Nevertheless, additional strain noticed in individual muscles as a result of unfavourable movement patterns need further investigations.
volume: 48, issue: 1
Forest workers often face repetitive and strenuous work tasks, leading to a high rate of musculoskeletal disorders and therefore incapacity for work. Most pronounced are pain as well as wear and tear in the lower back and the joints of knees and shoulders. Exoskeletons have already shown potential in reducing physical strain in various industries. Therefore, this pilot study aimed to investigate the usability and range of effects of a passive shoulder exoskeleton on forest workers during pruning operations in forestry to improve work conditions and reduce physical strain. Three healthy probands performed pruning tasks on Douglas fir trees in alternating sessions with and without the exoskeleton. Productivity, physical load, and muscle activity were assessed. Differences in working speed and productivity were observed among probands, but no correlations between exoskeleton use and productivity. Furthermore, no clear effect of exoskeleton use on heart rate or oxygen uptake was found. Electromyographic measurements indicated reduced muscle activity in three investigated shoulder muscles when wearing the exoskeleton. The anterior deltoid muscle of proband 3 shows the most significant response with a reduction of 39.9%, whereas the middle deltoid of probands 1 and 2 exhibits the greatest effect, with reductions of 14.5% and 14.0%, respectively. When comparing upward and downward arm movements specifically, the deltoid muscle activity (both anterior and middle) is reduced most effectively during downward movements. This reduction is most pronounced in proband 3, with a 56.5% decrease in the anterior deltoid, and in proband 1, with a 39.8% decrease in the middle deltoid. However, one proband exhibited noticeably increased loads in the upper trapezius muscle while wearing the exoskeleton, independent of the arm movement direction. This pilot study suggests that the passive shoulder exoskeleton has the potential to reduce muscle activity during pruning operations in forestry. Nevertheless, additional strain noticed in individual muscles as a result of unfavourable movement patterns need further investigations.